28
All/Perimeter System Arming and Disarming
Present the card to the reader or press CMD, the keypad displays DISARM? or PERIM
ALL (when arming). Press the select key under the desired option. The keypad
displays ENTER CODE: -. Present the card to the reader. Once validated by the
system, the selected areas arm or disarm automatically. On 7073/A and 7173 keypads,
the Door Strike relay then activates.
Home/Away System Arming and Disarming
Present your card to the reader. If the system is armed, once the card is validated, all
areas are disarmed and the keypad displays ALL SYSTEM OFF. If the system is
disarmed when you present your card, once the card is validated, HOME SLEEP
AWAY displays. Manually select HOME, SLEEP, AWAY or after a short time-out, all
areas automatically arm in the AWAY mode.
PERIM ALL
DISARM?
or
The system arms or disarms the areas and
activates the door strike relay on the 7073 or 7073A keypad.
Figure 12: All Perimeter Arming and Disarming
End User Training
To Next Page
Loading...
Need help?
General
