64 65
Measurement
Double-click on the picture to enter the measurement
, you can interface. Under the ‘Measurement’ icon
choose any desired option to measure.
Available options are:
1. Any Angle Line Measurement
Click from one point and drag to the next point, and then
release.
2. Continuous Line Measurement
The Continuous Line measurement allows you to
measure any continuous desired length.
Click and drag from one point to other desired points,
then release.
3. Radius Circle Measurement
Click and extend to the desired radius, the radius,
circumference and area of the circle will show up
accordingly.
4. Diameter Circle Measurement
Click and extend to the desired diameter, the diameter,
circumference and area of the circle will show up
accordingly.
5. Three Points Angle Measurement
Define any three points angle and click, the angle value
To Next Page
Loading...
