DoAll C-916 - Roller Stock Tables; Worklight

'
II
,,
,
,
I
ROLLER STOCK TABLES
Your machine may be equipped with one of the
following roller stock tables positioned behind
the machine's rear frame or in front of the stock
unloading tray:
(1) Roller stock table 5 feet (1525 mm} long by
18 inches (455 mm) wide.
(2) Roller stock table 10 feet (3050 mm} long by
18 inches (455 mm} wide. See Fig . 25.
FOOT
PAD
GUIDE
RAIL
t
V
ROLLERS
0
!
LEVELING i
SCA EW ~
FIG. 25. TYPICAL ROLLER STOCK TABLE.
WORKLIGHT
A worklight which requires a separate power
source can be used with the machine to provide
further work area illumination .
17