64
10.3. USING AND CHARGING YOUR TWIN OR SINGLE
When using a Dockmate remote, that was charged to 100%, it takes up to 3 hours of constant use
(remote actively communicating with the Receiver) to deplete the battery.
This translates to a few very difficult and/or long docking manoeuvres, or at least 15 10min docking
manoeuvres.
During our test charging a Dockmate remote from empty to completely full takes up to 1h 30min. In
practice we have observed a typical charging time for a Dockmate remote of 20 to 40 min. For
boaters using our latest Dockmate Cradle, their Dockmate remote is virtually always charged up and
ready for use.
To Next Page
Loading...
