EasyManua.ls Logo

DOLD BI 5910 - Application Notes

DOLD BI 5910
140 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
10
Attention: A remote control is regarded as a control device and also as safety part
because of it’s facility to switch off by the European Machinery Directive.
Rules resulting from this fact have to be observed in operation.
Application Notes
For optimum safety during operation of the remote control it is recommended to
observe the instructions stated in this manual.
The operator must be trained and have a permission to use remote controls.
A visible E-stop must always be active. When placed in the charger the remote
control is not active. Therefore the charger must be mounted in a way that the built
in e-stop button is not visible.
Attention: A remote control is regarded as a control device and also as safety part
because of it’s facility to switch off by the European Machinery Directive.
Rules resulting from this fact have to be observed in operation.
Application Notes
For optimum safety during operation of the remote control it is recommended to
observe the instructions stated in this manual.
The operator must be trained and have a permission to use remote controls.
A visible E-stop must always be active. When placed in the charger the remote
control is not active. Therefore the charger must be mounted in a way that the built
in e-stop button is not visible.

Table of Contents

Related product manuals