82
82
3.9 Configuration of remote control
The following parameters can be set on the remote control:
- Transmission frequency, selection of channel 01 – 64
- Time interval for activity monitoring 0-99 sec or 0-98 min or infinite (99 min)
- transfer of identity code from electronic key to the remote control
By a special procedure a trained and authorised person can disable or enable the above
functions.
3.9 Configuration of remote control
The following parameters can be set on the remote control:
- Transmission frequency, selection of channel 01 – 64
- Time interval for activity monitoring 0-99 sec or 0-98 min or infinite (99 min)
- transfer of identity code from electronic key to the remote control
By a special procedure a trained and authorised person can disable or enable the above
functions.
To Next Page
Loading...
