DOLD BI 5910 - Installation Notes

111
111
Experience shows, that an excellent working system is dependent on a careful installation:
- Protection against disturbance,
- Selection of operating frequency,
- Help on movement control,
- Location of BI 5910 and aerial,
- Careful wiring of BI 5910 and the connected systems,
- Protection of the electric supply,
- Min. and max. switching current of the different outputs
6. Installation Notes
6.1 Disturbance protection
If inductive loads are connected to relay outputs (contactor coils, valves, electric brakes) it is
necessary to provide the right protection devices (capacitor, RC-combination, diods, etc.) to
the controlled actuators and connect them with the shortest possible wiring.
Experience shows, that an excellent working system is dependent on a careful installation:
- Protection against disturbance,
- Selection of operating frequency,
- Help on movement control,
- Location of BI 5910 and aerial,
- Careful wiring of BI 5910 and the connected systems,
- Protection of the electric supply,
- Min. and max. switching current of the different outputs
6. Installation Notes
6.1 Disturbance protection
If inductive loads are connected to relay outputs (contactor coils, valves, electric brakes) it is
necessary to provide the right protection devices (capacitor, RC-combination, diods, etc.) to
the controlled actuators and connect them with the shortest possible wiring.