EasyManua.ls Logo

DOLD BI 5910 - Page 137

DOLD BI 5910
140 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
137
137
Bild 2
6. Remove old defective battery
7. Connect new battery
8. Check position of battery it must fit properly
into the cover
9. Please check cleanness of seal and
enclosure and close the unit, do not
squeeze battery cable
10. Tighten the screws in the sequence shown
in picture 2 to provide perfect seal.
11. Replace electronic key
12. Protection of persons must be provided
when doing the necessary tests.
Appendix
D Exchange of rechargeable battery
Bild 2
6. Remove old defective battery
7. Connect new battery
8. Check position of battery it must fit properly
into the cover
9. Please check cleanness of seal and
enclosure and close the unit, do not
squeeze battery cable
10. Tighten the screws in the sequence shown
in picture 2 to provide perfect seal.
11. Replace electronic key
12. Protection of persons must be provided
when doing the necessary tests.
Appendix
D Exchange of rechargeable battery

Table of Contents

Related product manuals