DOLD BI 5910 - Page 64

64
64
2.12 Indication
green LEDs
K1 und K2
green LED
reception
(state radio
part 2)
If access to the dangerous area is permitted, the machine must only run on full speed, if output
58 is OFF and output 17 is continuously ON.
OFF
Safety relays
K1 and K2 inactive
No radio signal
Bad radio signal
flashing
- flashing:
Bad radio signal
- symmetric flashing:
failure in receiver unit
teil (failure code)
continuous ON
Safety relays
K1 and K2 active
Good radio signal
2.12 Indication
green LEDs
K1 und K2
green LED
reception
(state radio
part 2)
If access to the dangerous area is permitted, the machine must only run on full speed, if output
58 is OFF and output 17 is continuously ON.
OFF
Safety relays
K1 and K2 inactive
No radio signal
Bad radio signal
flashing
- flashing:
Bad radio signal
- symmetric flashing:
failure in receiver unit
teil (failure code)
continuous ON
Safety relays
K1 and K2 active
Good radio signal