EasyManua.ls Logo

Dolmar MS-24 U User Manual

Dolmar MS-24 U
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MS-24 U
Original Instruction Manual
Originalbedienungsanleitung
Important:
Read this instruction manual carefully before putting the brush cutter/string trimmer into operation and strictly observe the safety regulations! Preserve
instruction manual carefully!
Wichtlg:
Bitte lesen Sie dieses Anweisungshandbuch sorgfältig durch, bevor Sie die Motorsense / den Rasentrimmer in Betrieb nehmen, und beachten Sie die
Sicherheitsvorschriften strikt!
Bewahren Sie das Anweisungshandbuch sorgfältig auf.
Question and Answer IconNeed help?

Do you have a question about the Dolmar MS-24 U and is the answer not in the manual?

Dolmar MS-24 U Specifications

General IconGeneral
Engine Displacement24.5 cc
Engine Type2-stroke
Power Output1.0 HP
Fuel Tank Capacity0.5 L
Shaft TypeStraight
Starter SystemRecoil

Summary

Safety Instructions

General Safety Instructions

General safety guidelines for operating the brush cutter/string trimmer. Emphasizes user responsibility.

Intended Use of Machine

Specifies the approved uses for the brush cutter/string trimmer and warns against misuse.

Required Personal Protective Equipment

Details essential safety gear, including helmet, visor, eye protection, hearing protection, gloves, and footwear.

Refuelling and Fuel Storage

Safe Fuel Handling

Precautions for handling fuel safely, including ventilation, avoiding skin contact, and eye protection.

Correct Fuel-Oil Mixture

Explains the correct fuel and oil mixture ratio (50:1) for the two-stroke engine.

Operating the Brush Cutter

Kickback Hazards and Prevention

Explains kickback hazards and provides techniques to avoid them during operation.

Cutting Tool Selection and Use

Specifies the correct cutting tools to use and warns against using unauthorized alternatives.

Technical Data

Designation of Parts

Engine and Shaft Assembly

Handle Mounting

Protector Mounting

Cutter Blade and Nylon Head Mounting

Cutter Blade Installation

Detailed steps for fitting the cutter blade, including tightening torque.

Nylon Cutting Head Installation

Instructions for attaching the nylon cutting head to the receiver washer.

Fuel and Refuelling Procedures

Fuel Handling Precautions

Precautions for handling fuel, avoiding vapors and skin contact, and eye safety.

Fuel-Oil Mixture Ratio Details

Details the recommended 50:1 mixture ratio for two-stroke engine oil and gasoline.

Starting and Stopping Procedures

Cold Start Procedure

Step-by-step guide for starting the engine from a cold state, including choke and primer usage.

Operation and Idling Adjustment

Nylon Cutting Head Operation

Servicing Instructions

Related product manuals