16
Attachment of shoulder strap
– Adjust the strap length so that the cutter blade will be kept parallel with the
ground.
Observe the applicable accident prevention regulations!
STARTING
Move at least 3 m away from the place of refuelling. Place the Petrol Brushcutter on a clean piece of ground taking care that the cutting tool
does not come into contact with the ground or any other objects.
A: Cold start
1) Set this machine on a at space.
OPERATION
Lock-off lever
High speed
Low speed
Throttle lever
Hanger
CORRECT HANDLING OF MACHINE
POINTS IN OPERATION AND HOW TO STOP
Detachment
For MS-245.4 C, MS-245.4 CE
– In an emergency, push the notches (1) at both sides, and you can detach the
machine from you.
Be extremely careful to maintain control of the machine at this time. Do not
allow the machine to be deected toward you or anyone in the work vicinity.
WARNING: Failure to maintain complete control of the machine at all could
result in serious bodily injury or DEATH.
For MS-245.4 U, MS-245.4 UE
– In case of emergency, remove the emergency detachment lever (2) by pulling
strongly with a nger. The machine sill detach from body.
Be extremely careful to maintain control of the machine at this time. Do not
allow the machine to be deected toward you or anyone in the work vicinity.
WARNING: Failure to maintain complete control of the machine at all could
result in serious bodily injury or DEATH.
MS-245.4 C
MS-245.4 CE
MS-245.4 U
MS-245.4 UE
STOP
(1)
STOP
OPERATION
Lock-off lever
High speed
Low speed
Throttle lever
(1)
(1)
Hanger
(2)
To Next Page
Loading...
