Dolmar PS-6400 - Clutch Drum; Rim Sprocket

8Repair Manual PS-6400/PS-7300/PS-7900
P
O
W
E
R
M
A
T
E
3
/
8
-
7
Sprocket, clutch drum and needle
bearing
Inspect the sprocket for damage and wear.
Important customer information:
Before installing a new chain the sprocket must be
inspected.
Worn sprockets will damage a new saw chain and
must always be replaced.
Check the clutch drum bearing for damage and wear.
Assemble with multipurpose high-performance
grease (944.360.000).
Check the clutch drum for damage and wear, and
replace if worn.
Note:
Always use a new circlip (927.408.000)!
02 CLUTCH DRUM / RIM SPROCKET