OPERATION
3-54 EPT031055 Issue 2 September 2017
BACKUP AND RESTORE
Backup
Home > Settings > Backup & Restore > Backup
A backup can be saved to the printer’s disk, to the TouchPanel or to the
BCP7 controller connected USB device.
Navigate to the folder to which you wish to copy the backup files.
The following backup types can be selected:
• Messages: All messages of all stores
• Fonts: All fonts
• Graphic Files: All graphic files
• Configuration Files: System configuration files
• Security Setup: User and group setup
• Application Log: All log files
• Operating System: The operating system of the printer
• Binary Files: Driver plug-ins, firmware, correction matrix
Files will be copied to USB/Backup on the USB device. A prompt will
display when the back-up is complete.
A backup copied to the USB device can be used to restore to the same
printer, another printer or used for information.
Restore
Home > Settings > Backup & Restore > Restore
CAUTION: If restoring information to a different printer, it is
essential that the printer hardware is of the same
version level. Please contact Domino for advice.
Insert the USB device containing the backup files into the USB port of the
TouchPanel or into the USB port of the BCP7 controller.
Navigate to the folder containing the backup files and click on Restore.
To Next Page
Loading...
Need help?
General
