WARNINGS:
AS SUPPLIED, THIS CODER IS A CLASS 4 LASER PRODUCT. DURING
OPERATION, IT WILL EMIT UP TO 140 WATTS OF PULSED INVISIBLE
LASER RADIATION AT A WAVELENGTH BETWEEN 1030 AND 1120
NANOMETERS. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR
SCATTERED RADIATION.
THE PRODUCTS CONTAIN EMBEDDED LASER DEVICES THAT EMIT
INVISIBLE RADIATION IN THE REGION OF 900 - 1000 NM WITH A
TOTAL OUTPUT POWER OF UP TO 140 W FOR THE RATED OUTPUT
POWER OF THE LASER MODULES: THIS RADIATION IS NOT
ACCESSIBLE TO THE USER UNLESS THE PROTECTIVE HOUSING IS
OPENED.
THE PRODUCTS CONTAIN EMBEDDED LASER DEVICES THAT EMIT
VISIBLE RADIATION IN THE REGION OF 630 - 670 NM WITH A TOTAL
OUTPUT POWER OF UP TO 5 MW FOR THE RATED OUTPUT POWER
OF THE LASER MODULES.
THE LASER MAY EMIT SIGNIFICANTLY HIGHER POWERS UNDER A
SINGLE FAULT CONDITION (<120 W 1030 – 1200 NM; <100 W 900 –
1000 NM).
THIS CODER MUST BE FITTED WITH CLASS 1 LASER GUARDING TO
SAFEGUARD AGAINST ACCIDENTAL EXPOSURE TO DIRECT OR
SCATTERED RADIATION BEFORE IT IS OPERATED OR MADE READY
FOR USE.
GUIDANCE ON CREATING AND FITTING LASER GUARDING CAN BE
FOUND IN PART 1 OF THE PRODUCT MANUAL.
USE OF CONTROLS OR ADJUSTMENTS OF PERFORMANCE OR
PROCEDURES OTHER THAN THOSE SPECIFIED IN THIS MANUAL
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
To Next Page
Loading...
Need help?
General
