OPERATION
EPT009665 Issue 2 May 2015 3-53
The output power and pulse energy depends on the laser current, the
pulse repetition frequency and the waveform. For each waveform
there is a corresponding “Reference Frequency”: PRF
0
. Between 1
kHz and PRF
0
the power increases linearly with the frequency until
the nominal power at PRF0 is reached. Above PRF
0
the laser power
stays at the nominal level.
.
The pulse energy stays at the nominal level, in between 1 kHz and PRF
0
and decreases above PRF
0
.
To Next Page
Loading...
