INSTALLATION INSTRUCTIONS
EPT009665 Issue 2 May 2015 2-11
ELECTRICAL CONNECTIONS
The following cables are part of the delivered package:
• Mains connection cable
• Connector plug to the machine control (X4)
Type: 12-pole cable socket, solder connection, strain relief PG11
• USB and Ethernet Connections
• Connector plugs for X23, X59, X7, X28, X3, X6, X4, X2, X29, X58
X23 RS232 COM1
X59 Ethernet 2: Remote Panel Interface
(pre-configured 192.168.57.2, 255.255.255.0)
USB USB 1.1 Port
Ethernet Ethernet Connection
(192.168.58.2, 255.255.255.0)
X7 Fume Extractor
X28 Air / Chiller Control
X3 Photocell/Product Detector
X6 Quadrature Shaft Encoder
X4 Machine Control
X2 Beacons
X29 Interlock/ Process Start Interconnection to X68
X58 Power Extension
X24 Interconnection to laser unit F220i
USB
Laser On/Off
X6
X3
Power from
laser unit
F220i
X7
X4
X28
X2
X29
Control Unit Electrical Connections
X58
X23
X59
Ethernet
On/Off
X24
To Next Page
Loading...
