Doms PSS 5000 Hardware Configuration Guide

PSS5000/CONF/804473/40 35 of 54
PSS 5000 – Hardware Configuration Guide
Selecting the CPU Board and Interface Modules
4 PSS 5000 CPU Board and Cabinet Specifications
Overview These hardware specifications are provided in the following topics:
• ‘4.1 PSS 5000 CPU Boards’ on page 35
• ‘4.2 PSS 5000 Cabinets’ on page 37
• ‘4.3 System Versions’ on page 37
4.1 PSS 5000 CPU Boards
Selecting the correct
CPU Board
To select the correct CPU board, it is necessary to consider which forecourt
devices are present and the applications that require support. The table below
provides a list of basic functions that are supported by
CPB505 and CPB508.
Note: CPB505 and CPB508 are no longer in production.
If the site is restricted to the functions listed above and no additional functions
are required, or expected, then either the
CPB505 or CPB508 is sufficient.
However, if applications that use additional functions, for example Back Of-
fice Record storage and Vapor Recovery Monitoring, are required, or future
developments will demand similar applications, then it is necessary to select a
CPB505-2, CPB509 or CPB539.
Functions
Doms POS Protocol Basic functions:
• Dispense Control – for all protocols
• Price Display Control – for all protocols
• Wet Stock Control – for all protocols
Doms Host Protocol Basic versions:
• site_sta.xml
• site_rep.xml (max. 3 reports)
• newdeliv.xml (max. 20 deliveries)
• newevent.xml (max. number depends on type of
events, which vary in size. max. size is 20kBytes)
• new_bor.xml (max. 1500 records)

Doms PSS 5000 Specifications

General

Brand	Doms
Model	PSS 5000
Category	Controller
Language	English