48 of 54 PSS5000/CONF/804473/40
PSS 5000 – Hardware Configuration Guide
Selecting the CPU Board and Interface Modules
08 July 29, 2009 The following changes have been made:
• Added Nara/Topaz to pump protocols
• Added Nara/Topaz to list of Interface Notes for pump
protocols
09 Sept. 15, 2009 The following changes have been made:
• Added VDS to price pole protocols
• Added VDS to list of Interface Notes for price pole
protocols
• Added information about device hardware configura-
tions affecting loading on the interface connections
between the HIM and the device
10 Nov. 2, 2009 The following changes have been made:
• Added Dresser-Wayne to terminal manufacturers list
• Added Wayne CL/EPS-42 Terminal to terminals pro-
cotol list
• Added Tatsuno-Benc to pump proctocols list
• Removed DSB363
• Reorganized Interface Type and HIMs table
11 Dec. 15, 2009 The following changes have been made:
• Added Orpak and Postec to terminal manufacturers
list.
• Added Orpak VIT and Postec Prism to the Terminal
Protocols and HIMs list.
• Updated the information for the VDS protocol in Price
Pole Protocols and HIMs
12 Mar. 24, 2010 The following changes have been made:
• New information about selecting the correct CPB has
been included in CPU Board and Cabinet Specifica-
tions section.
• Added VDS to the price pole manufacturers list
• Added Galileo GC21 XP to pump protocols list
• Added DMB514 module to DMB HIM list
• Updated Reference documents list with Galileo Inter-
face Notes details
• Added 2-wire, active pull down to Interface Types ta-
ble
13 Sept. 13, 2010 The following changes have been made:
• Changed module used for Veeder-Root TGS in
worked example to DSB347
• Added Inst / Instrumentointi to pump manufacturers
list
• Added Prompribor to pump manufacturers list
• Added Banksys to terminal manufacturers list
• Added Prompribor LIVNY protocol to pump protocols
list
• Added Gascomm proocol to pump protocols list
• Added Banksys protocol to terminal protocols list
Rev. Date Description of Changes
To Next Page
