Need help?Do you have a question about the DOMUSA EVOLUTION EV FDX and is the answer not in the manual?
Details indicator lights, digital display, and selection buttons for boiler operation.
Specifies ventilation, access, and general site preparation for boiler installation.
Covers plumbing, pressure, condensate drainage, and electrical hookup procedures.
Guides oil line installation and the setup of combustion product exhaust.
Details exhaust duct placement rules and the Ø80mm dual-duct system (Type C53).
Instructions for setting the desired boiler operating temperature and recommended range.
Operation details for heating and DHW production simultaneously.
Features protecting pumps from blockage and the boiler from freezing.
Boiler pressure monitoring and connection for remote phone control.
Connecting a room thermostat for optimized heating control and comfort.
Describes the safety shutdown due to overheating and its reset procedure.
Explains burner lockout, its causes, and how to reset it.
Details lockout due to low boiler pressure and the resolution steps.
Information provided by the Technical Assistance Service upon initial startup.
Recommended annual cleaning of combustion chamber, pipes, and condenser.
Advice on preventing damage from freezing, including antifreeze use.
Discussion on water hardness and the use of treated water in heating systems.
Covers burner mounting, oil supply setup, and initial burner start-up procedures.
Guidance on combustion, nozzle selection, technical data, and physical dimensions of the burner.
Details airflow adjustments, electrode placement, oil pressure, and burner electrical schematics.
Instructions for connecting and disconnecting the oil tube to the combustion line.
Common burner issues, their causes, and recommended solutions.
Common boiler issues, their causes, and recommended solutions.
To Next Page
General
