DoorKing 1803 - Page 33

29
1800-060 Issued 7-19
Version A
? ? ? ?
04
0
3. Press together to end this programming sequence (beeeeeep).
1. Press and enter your four-digit MASTER CODE (beep).
2. Enter the single-digit hang-up code desired (0, 1, 2 or 3), then press (beep).
This programming sequence determines when the phone system will automatically hang itself up after a predetermined time of
inactivity. You can program the system to not hang-up (0), to hang-up after 5 sec of dial-tone (1), to hang-up after 15 sec of
silence (2) or to hang-up after either 5 sec of dial-tone or 15 sec of silence (3).
Factory setting = 1 (hang-up after 5 sec of dial-tone).
3.1.13 Automatic Hang-up Function
0
1
2
3
No hang-up.
Hang-up after 5 sec. of dial-tone (Factory setting).
Hang-up after 15 sec. of silence.
Hang-up after 5 sec. of dial-tone OR 15 sec. of silence.
Hang-up Code Function