DoorKing 1814 - Surface Mount Units with Recess Box

1
1
1.1.2 Surface Mount Units with Recess Box
Surface mount units can be semi-flush mounted into a wall or pilaster by using the optional recess-
mounting box (p/n 1803-150). Be sure the unit is mounted securely and is not subject to vibration
from closing doors or gates.
CAUTON!
If this entry system is used to control a vehicular gate with an automatic gate operator, the
entry system must be mounted a minimum of ten (10) feet away from the gate and gate operator, or
in such a way that a person cannot operate the entry system and touch the gate or gate operator at
the same time.
.5
3.625
2.25
4.875
8.375
11.0
13.25 15.25
2.125
11.125
15.00
2.125
3.375
12.0
13.25
2.2
5.75
9.3
11.5
2.0
2.68
8.812
1.06.5
1.375 DIA
.25 DIA
10-24 x 1.25 STUD
.25 DIA
.25 DIA
Surface Mount
Entry System
1803-150
Recess Box