6
1.1.7 Wall Mount Units
Wall mount units (models 1815 and 1817 only) are designed to be mounted directly onto a wall
without the need of cutting a large hole as is necessary with flush mount units. Wall mount units are
not designed for direct exposure to the weather. Be sure the unit is mounted securely and is not
subject to vibration from closing doors or gates.
CAUTON!
If this entry system is used to control a vehicular gate with an automatic gate operator, the
entry system must be mounted a minimum of ten (10) feet away from the gate and gate operator, or
in such a way that a person cannot operate the entry system and touch the gate or gate operator at
the same time.
3.125
14.125
12.375
10.0 1.187
11.6251.375
3.0 3.03.187
1.75
.25 DIA
.875 DIA
To Next Page
Loading...
