3-10 Operation 022-00029AE Operation and Maintenance Manual
1. Unlatch frame lock plate between front and
rear frames before traveling. Secure lock
plate to rear frame (Figure 15).
2. Set pilot cutoff switch to "I" (UNLOCKED)
position. Raise bucket to a height of 400
mm (16 in) above the ground. Tilt bucket
completely back.
3. Set pilot cutoff switch to "O" (LOCKED)
position. This will prevent boom and bucket
from accidentally moving during travel, as
a result of accidentally touching pilot
control valve lever (joystick).
4. Press brake pedal.
Figure 15
HBOI110L
O
I
Figure 16
O
HBOI111L
Figure 17
Figure 18
To Next Page
Loading...
