1-24 Safety 022-00029AE Operation and Maintenance Manual
MACHINE OPERATION
OPERATE WHILE SEATED AT OPERATOR’S
STATION ONLY
Never reach in through a window to work a
control. Do not try to operate wheel loader
unless you’re in command position - seated at
controls. You should stay alert and focused on
your work at all times. Do not twist out of seat if
job activity behind you (or to the side) requires
your attention.
Use a spotter or signal person if you cannot see
clearly and something is happening behind you.
Replace damaged safety labels and lost or
damaged operator’s manuals.
Do not let anyone operate machine unless
they’ve been fully and completely trained, in
safety and in operation of the machine.
SEAT BELTS SHOULD BE USED AT ALL
TIMES
Whenever engine is running, operator should be
seated at the control station with seat belt
properly engaged.
MOVEMENT ALARMS
If wheel loader is equipped with an audible travel movement alarm, test alarm on a daily basis. Audible
alarm should sound as soon as travel system is engaged.
IMPORTANT
If you need more information or have any questions or concerns about safe operating
procedures or working the wheel loader correctly in a particular application or in the specific
conditions of your individual operating environment, please consult your local DOOSAN
representative.
HAOA151L
Figure 16
Figure 17
To Next Page
Loading...
