2-32 Operating Controls 022-00029AE Operation and Maintenance Manual
18. PARKING BRAKE SWITCH
O. In this position, the parking brake is
"RELEASED" and the monitor light
on the front instrument panel turns
"OFF."
I. In this position, the parking brake is
"APPLIED" and the monitor light on
the front instrument panel comes
"ON." This brake can also be used as
an emergency brake.
WARNING!
Set the parking brake switch in the
"I" (APPLIED) position before leaving
the loader. Make sure to "APPLY" the
parking brake switch before trying to
start the loader.
CAUTION!
Do not use this parking brake to
brake the loader, except in an
emergency; otherwise, it might cause
premature wear or damage of the
brake.
O
I
HAOP042L
Figure 66
AQO0171L
Figure 67
To Next Page
Loading...
