Book: 23227143 (8-24-2010) Rev CPage14
7. Service Air Switch: Momentary ON/OFF switch. Allows user to load
compressor after engine warm-up.
8. Wait To Start Lamp: Indicates engine inlet heater is operating wait till
lamp turns off before starting machine.
9. Engine Tachometer: Indicates engine speed in RPM from 0 when
stopped to full speed. (If equipped)
4 –IN-1 Gauge Assembly (if equipped)
10. Compressor Oil Temperature Gauge
11. Engine Oil Pressure Gauge
12. Engine Coolant Temperature Gauge
13. Battery Voltage Gauge
WEDGE Lights (located inside machine on bracket)
14. High Compressor Temperature Diagnostic Light: Indicates
SHUTDOWN due to high compressor temperature.
15. Low Engine Oil Pressure Diagnostic Light: Indicates ALERT or
SHUTDOWN due to low engine oil pressure.
16. High Engine Coolant Temperature Diagnostic Light: Indicates ALERT
or SHUTDOWN due to high engine coolant temperature.
19
14
15
16
17
18
20
21
22
23
24
To Next Page