Book: 23227143 (8-24-2010) Rev CPage52
COMPRESSOR CODE 51
Machine ID Not Installed
Troubleshooting Steps
Action Result
Step 1:
Select correct machine ID from the “Machine Models
List” in this manual and load into the WEDGE. Refer
to the section “Entering Machine ID For Wedge
Control Systems” in this manual.
Explanation:
The WEDGE does not have a machine ID loaded. Code 51 will occur only when a
new WEDGE is installed and the machine ID has never been loaded. The machine
ID defines the proper operational profile of a machine type. Absence of code 51 does
not ensure the machine ID is correct.
Effect:
Code 51 is a SHUTDOWN condition and will prevent any operation of the machine.
The Compressor Malfunction light will be on solid, and Code 51 will be displayed.
To Next Page