Dormakaba 1460 - 4.5.2.1 and 4.5.2.2 Actuator Settings

4.5.2.1 Setting the time
1. Open the 'Settings' menu.
2. Open the 'Actuator' menu.
3. Log in to the actuator using the master medium.
4. Connect the programmer to the actuator.
5. Choose the 'Set clock' sub-menu.
6. Press the ENTER key.
7. Select "Yes".
ð The time is updated.
4.5.2.2 Battery change
In this menu, a time stamp is created for the battery change.
1. Open the 'Settings' menu.
2. Open the 'Actuator' menu.
3. Log in to the actuator using the master medium.
4. Connect the programmer to the actuator.
5. Select the 'Battery change' sub-menu.
6. Press the ENTER key.
7. Select "Yes" if a new battery has been placed.
Operation User Manual
20 - 06/2021dormakaba Programmer 1460