Page 2 of 28 Saffire LX
Table of Contents
Table of Contents
1. Introduction and disclaimers ................................................................... 3
2. Recommended Tools ............................................................................. 3
3. Components ......................................................................................... 4
4. Install key cylinder (optional) ................................................................. 6
5. Install thumbturn spindle (optional) ........................................................ 6
6. Install the lock spindle ........................................................................... 7
7. Setting up the inside trim assembly ......................................................... 9
8. Installing the locking mechanism on the door ......................................... 12
8.1. Installing the mortise ASM (if lock equipped) ....................................... 12
8.2. Installing the cylindrical models (if lock equipped) ................................ 15
9. Installing the lock housings on the door ................................................. 18
10. Connecting the cables .......................................................................... 19
11. Installating inside cover ....................................................................... 20
12. Installing the outside lever handle ......................................................... 23
13. Install the batteries ............................................................................. 23
14. Test lock functionality .......................................................................... 24
15. Program the lock ................................................................................. 24
Annex A.. ................................................................................................... 25
Annex B…………………………………………………………………………………………………………..………..28
Model: Saffire LX
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the
following two conditions: (1) This device may not cause interference; and (2) This device must
accept any interference, including interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil
ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
Made in Canada
©2018 dormakaba Lodging Systems.All trademarks and registered trademarks are the property of their
respective owners.
Caution: Changes or modifications to this equipment not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.