EN
SVA 6xxx
Commissioning instructions
060652-45532/16387 – 05/2023 1
Contents
1 Information about this document 1
1.1 Contents and purpose 1
1.2 Target group 1
1.3 Other applicable documents 1
1.4 Abbreviations 1
1.5 Symbols used 1
2 Safety 2
2.1 Intended use 2
2.2 Non-intended use 2
2.3 Reasonably foreseeable misuse 2
3 Product description 2
3.1 Parts included 2
3.2 Door fittings required 2
3.3 Technical data 3
3.4 Variants 3
3.4.1 Variants for solid doors, adjustable
quiescent current/operating current
principle 3
3.4.2 Variants for tubular frame doors not
adjustable quiescent current/operating
current principle 4
3.5 Classification 4
4 Pin assignment 5
4.1 Block diagram SVA 6xxx Stand Alone 5
4.2 Connecting cable SVP-A 1100/2100 5
5 Mounting 6
6 Disassembly and disposal 6
1 Information about this document
1.1 Contents and purpose
This document supplements the SVA/SVI locks'
assembly instructions and contains technical
information for the mounting and commissioning of
an SVA6xxx lock.
1.2 Target group
The locks may only be mounted by technical
specialists who have been trained for this purpose by
dormakaba.
1.3 Other applicable documents
• SVA/SVI locks assembly instructions
• Manual for the connecting cable SVP-A1100/2100
• Technical documents for the selected control unit
• Commissioning instructions for the SVI lock
1.4 Abbreviations
SVA
Active, self-locking
(anti-)panic lock for the active door leaf
in 2-leaf door units
SVI
Inactive, self-locking (anti-)panic lock for
the passive door leaf in 2-leaf door units
6xxx
All versions of a lock; the exact lock type
is marked with 3 digits instead of xxx.
G Active door leaf
S Passive door leaf
1.5 Symbols used
1
2
Item numbers used in image
caption
To Next Page
Need help?
General
