LMA-A REV.DOC 23/04/08
12
CHAPTER 5
ELECTRIC CONNECTION AND INSTALLATION
5.1 - INSTALLATION
THE MANUFACTURE IS NOT RESPONSIBLE FOR THE MATERIAL AND
PERSONAL DAMAGES THAT A WRONG INSTALLMENT MAY CAUSE.
The LMF624 & LMA630 is wheel-mounted so you can move it easily.
The surface where the machine (LMF624, LMA630, LSA616 or LSB516) will be in
service must be solid, horizontally leveled, in a way to prevent a possible instability and
consequently a fall during the working process.
The sheeter (LMA630 & LMF624) doesn’t need to be fixed on the floor, just tighten up the
anti-vibrate footing supports (fig. 5.1).
Fig. 5.1
To Next Page
Loading...
Need help?
General