LMA-A REV.DOC 23/04/08
13
5.2 - ELECTRIC INSTALLATION
Make sure that the plugs you have in the room have the same voltage and power presented
on the machine’s nameplate.
This machine is equipped with trees legs plug. For your protection, always connected this
plug in an outlet equipped with the same configuration and never cut one of those legs.
The electric plug must be as close as possible to the machine.
Avoid plugging more than one machine into the same electric plug. In case you need to
plug more than one machine in the same electric plug, make sure that it has the electric
capacity for it.
See chapter 4.3 NEMA configuration for the plug on the machine.
5.2.1 - PRECAUTIONS
Warning! Take all the precautions in a way to avoid dangers of fire, electric shocks and
personal damages. Only qualified people are allowed to intervene in the electric parts of the
machine, always follow these rules:
1. Stop the machine.
2. Switch off the power, the general switch.
3. Unplug the machine.
4. Do the necessary repairs or maintenance.
5. Plug the machine only at the end.
To Next Page
Loading...
Need help?
General