D+H LSC-M Series User Manual

12345678
ON
12
ON
5.18
5.19
ON
ON
S2
RZN RZN
System
S1
S2
37/48
LSC 44-M4
99.823.35 1.2/06/09
DIP Switch 1 on ON
DIP Switch 1 on OFF
DIP Switch 2 on ON
DIP Switch 2 on OFF
DIP Switch 3 on ON
DIP Switch 3 on OFF
DIP Switch 4 and 5
DIP Switch 6 and 7
DIP Switch 8
=
=
=
=
=
=
=
=
= not connected
Alarm smoke detector on first evacuating level will release
SHEV-alarm
Alarm smoke detector on first evacuating level will be only indicated as
floating in neutral position
Alarm smoke detector on first evacuating level will be indicated on low
tension side for acoustic alarm devices.
will not be indicated
SHEV-alarm will be indicated on low tension side for acoustic alarm devices
will not be indicated
Setting of duration
for acoustic alarm
The RAS-system will be after a power failure duration of
Emergency power supplied via build-in accumulators
Delivery state
DIP Switch 1 on ON
DIP Switch 2 on ON
=
=
Flap will be opened, if no power
supply available (power failure)
Flap will be closed as soon as power
supply is available again
Delivery state
DIP Switch S1
DIP Switch S2
4 5 time
OFF OFF
ON OFF
OFF ON
ON ON
30 seconds
1 minute
2 minutes
3 minutes
6 7 time
OFF OFF
ON OFF
OFF ON
ON ON
1 minute
3 hours
6 hours
72 hours
optional on request

D+H LSC-M Series Specifications

General

Brand	D+H
Model	LSC-M Series
Category	Smoke Alarm
Language	English