59
English
58
6) Timer Recording
This function is availabe when usb device is connected. You can choose a channel to
record the Program Guide menu by using . (Refer to 6.4 Electric Program Guide,
2)Timer)
6.9 PVR
5) Record Stop
⊹
Press the STOP button on the remote to stop the recording then Record Stop will be
displayed.
⊺
Select the recording file by OK / STOP button.
Press EXIT button then selected recording is stopped. <Figure 6-9-15>
<Figure 6-9-15>
6.9 PVR
ҫ
Note : 1. Do not remove the USB device while recording a program.
4) Instant Recording
⊹
You can record a current channel by using . If you then press , a time-banner
will be displayed.<Figure 6-9-13>
⊺
Press once more. The following picture shows that you can select item when you
record a current channel. <Figure 6-9-14>
- Channel : It shows a current channel.
- Name : It shows a current recording name.
- Duration : You can change the duration of recording time by using the / . And
current recorded time appear.
<Figure 6-9-13> <Figure 6-9-14>
To Next Page
Loading...