30 DR
®
TRIMMER/MOWER
If your DR TRIMMER/MOWER will be idle for more than 30 days, we recommend using a gas stabilizer. This will prevent
sediment from gumming up the Carburetor. If there is dirt or moisture in the gas or Tank, remove it by draining the Tank.
Completely fill the Tank with fresh, unleaded gas and add the appropriate amount of stabilizer or gasoline additive. Run the
Engine for a short time to allow the additive to circulate.
On Electric-Starting models, remove the Battery or store your DR TRIMMER/MOWER in a dry environment where the
temperature is between –10° F (–23° C) and +85° F (+23° C). Make sure the storage temperatures will never be outside these
limits.
To Next Page
Loading...
Need help?
General
