Dräger 8000 NC - Page 48

Technical Data
Measuring principles of sensors
Air temperature senso
Skin temperature sensor
Noise level inside the canopy
Air filter
NTC x 2
NTC
<49 dB (A) at 50 Hz;
<56 dB (A) at 60 Hz
Particle class P 2, in accordance with DIN 3181, factor 2 %
Skin temperature control
Sensor
Certification marks*
Display component,
subject to calibration
Sensor** subject to calibration
(2M 20 737)
Certification document*
Display component,
subject to calibration
Sensor** subject to calibration
Calibration tolerances*
Display component,
subject to calibration
Sensor** subject to calibration
Total measuring system
Use only authentic Drager sensors (see Order List, p. 52).
15.22
87.06
15.14
91.10
IB.13-78/87
IB.9.13-205/91
±0.2 °C
±0.1 °C
±0.3 °C
Classification The incubator complies with DIN- VDE 0750, Part 1,
EN 60601-1, IEC 601-1 and IEC 601-2-19
ft Type B
Electromagnetic compability (EMC) according to EN 60601 -1-2
"BabyLink lncubator"lnterface (optional) serial interface for print-out interface (optional)
of incubator data (actual values, set values, alarms)
ThermoMonitoring (optional) 2 nd skin temperature sensor to display peripheral
skin temperature.
Dimensions
Unit: height x width x depth in mm 1400 x 970 x 600
Bed: width x depth in mm 650 x 350
Weight 77 kg
* applies only in Germany
** or certified sensor with the same characteristic (400 Series, 2252 Q @ 25 °C)
48