Dräger 8000 NC - Cleaning;Disinfecting;Sterilizing.35

Care
Stripping down
Cleaning/disinfecting/sterilizing
1 Remove mattress from bed.
2 Lift off bed. Undo screw on ventilator hose support
and remove hose support. Remove bed extension.
3 Pull both support brackets up and out.
4 Remove base plate
Caution. Be careful not to burn yourself
The risk of burns from the heater is particularly great
when the incubator has been closed and this risk remains
for a long time after the unit has been switched off. (It
takes about one hour for the temperature to fall to 70 °C).
5 Remove fan.
6 Remove trough.
Cleaning/disinfecting/sterilizing
For users in the Federal Republic of Germany we recom¬
mend that only disinfectants on the current DGHM
(DGHM: German Society for Hygiene and Microbiology)
list of surface disinfectants are used.
For medical and hygienic reasons, disinfectants based on
quaternary compounds should be used.
Damage may occur to the material of the incubator, parti¬
cularly to the sensetive covering parts (PMMA/plexiglass
and PC/polycarbonate), if preparations are used which
are based on
- chlorine-releasing compounds
- organic and inorganic acids
- alcohols.
With regard to material compatibility we recommend the
following surface disinfectants:
Demykosan AF Messrs. Bayrol, Munich
Incidur Messrs. Henkel, Dusseldorf
Sekusept Powder Messrs. Henkel, Dusseldorf
Follow manufacturer's instructions.
A precondition for using non-recommended disinfectants
is that the manufacturer can prove material compatibility
with PMMA and PC.
35