8 Quick reference guide | Atlan SW 2.0n
Overview
1.1.4 Rear
1.1.4.1 Version with screw connections for standing gas cylinders
11 Water trap with connection for
sample line
Collects condensed water which forms in the
sample line. Protects the patient monitor and the
patient-gas measurement module against water,
bacteria and viruses.
12 Patient-gas measurement mod-
ule
Measures and monitors various gas concentra-
tions in the breathing gas (O
2, CO2, N2O, and
anesthetic gases).
13 Guide clip Used to securely lay the O
2 insufflation hose.
No. Designation Description
49321
No. Designation Description
1 Storage compartment Can be used as storage space.
2 Holder for hoses and cables Used for storing and winding up central supply
hoses and cables.
3 Gas supply block Provides connectors for gases from the central
gas supply system and for gas cylinders.
4 Gas cylinder holder (option) Secures the gas cylinders.
5 Strain relief for compressed gas
hoses
Protects the compressed gas hoses from loos-
ening inadvertently.
6 Gas cylinder park holder (option) Can hold an additional gas cylinder.
7 Auxiliary power sockets (option) Allow other devices to be connected.
8 Vent Discharges warmed air from the device into the
environment.
9 Ventilation slot Feeds ambient air to the device for ventilation.
10 Connectors Provides connectors for power cable, potential
equalization, and interfaces. Used for data
exchange between external devices, additional
components, and networks.
To Next Page
Loading...
Need help?
General
