EasyManua.ls Logo

Dräger Evita V300 - Assembly and Preparation; Assembly Safety Information

Dräger Evita V300
42 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Assembly and preparation
8
Assembly and preparation
Applies to:
Evita Infinity V500
Babylog VN500
–Evita V300
Safety information
Prepare trolley 2 – 90 cm
Securing accessories to the standard
rail
Maximum loads of holders
The following information applies to the holders:
WARNING
Risk of tipping over
Do not tilt the device by more than 5°.
Holder Position of the holder Maximum
load
Possible accesso-
ries
Maximum distance
to side rail
Universal holder
with standard rail
(G93140)
On the front of the trol-
ley
10 kg
(22 lbs)
Breathing gas humid-
ifier, medication neb-
ulizer
Humidifier holder,
can be swiveled
(G93111)
On the side of the trolley 5 kg
(11 lbs)
Breathing gas humid-
ifier
Humidifier holder,
side rail (8416325)
On the side rails of the
ventilation unit
1)
1) Maximum load on the side rails of the ventilation unit: 5 kg (11 lbs) per side rail
5kg
2)
(11 lbs)
2) If a hinged arm is attached to the side rails of the ventilation unit in addition to the humidifier holder (8416325), the maximum
load of 5 kg (11 lbs) per side rail must be observed. The humidifier holder can then only support 4 kg (8.8 lbs).
Breathing gas humid-
ifier
10 cm (3.9 in)
IACS hinged arm
(MP00690)
On the side rails of the
ventilation unit
1)
1kg
(2.2 lbs)
Breathing hoses 100 cm (39.4 in)

Other manuals for Dräger Evita V300

Related product manuals