Dräger Infinity Central Station - ICS and BedView Menu Functions

© 2014 Draeger Medic al , Inc .
INFINITY CENTRAL STATION & M300 QUICK REFERENCE GUIDE
| 11
THIS GUIDE IS INTENDED FOR REFERENCE ONLY. REFER TO INSTRUCTIONS FOR USE MANUAL.ADDITIONAL INFORMATION
ICS Menu Bar
Audio Pause
Pauses audio alarm signal tones for 2 minutes for all as-
signed patients (it does not affect the alarm state at the
source monitor).
Views...
Opens the Views dialog window where you can select
your preferred Main screen layout.
Remote
patient...
Accesses any available bed on the network within the
assigned monitoring units of the ICS.
Print screen
Prints the contents of the current screen on the config-
ured network laser printer.
Trends/Data
Opens the Trends/Data page, from which you can per-
form a number of patient related functions such as Find,
Clear
, Patient history..., Lock record, Delete record
, and
Connect
. You can also select
a specific patient and view
graphical and tabular data, Full disclosure data and
Events data for a patient from the Trends/Data dialog
window.
System
setup...
Opens the System setup... dialog window from which
you can select tabs to make a variety of
system-
related
selections pertaining to general settings, alarms, record-
ers/reports
and layouts. You can also access the Biomed
page with the appropriate password.
Telemetry
Opens the Telemetry defaults... dialog window (this but-
ton only appears when the telemetry option is enabled.)
Help
Access the instructions for use in PDF format.
Main screen
Returns to the Main screen and closes any window.