Dräger Infinity Central Station - ICS Features

© 2014 Draeger Medic al , Inc .
INFINITY CENTRAL STATION & M300 QUICK REFERENCE GUIDE
| 16
THIS GUIDE IS INTENDED FOR REFERENCE ONLY. REFER TO INSTRUCTIONS FOR USE MANUAL.ADDITIONAL INFORMATION
ICS Features
ICS SURVEILLANCE FEATURE
- Annunciates alarms (if audio setting turned on) for high- and
medium-priority alarm conditions, for patients (only bedside
monitored, not M300 patients) residing in the local monitoring
units of the ICS that are not assigned to viewports on the ICS
Main screen in the header bar.
- Displays these alarm messages in the header bar of the ICS
Main screen
- Select the View bed button quick access symbol: to ac-
cess the BedView page of the alarming bedside monitor to
view/silence the surveillance patient.
- Reports only physiological alarms, off-line alarms will not be
annunciated.
NIGHT TIME ALARM VOLUME
- If activated, a crescent moon symbol appears in the top right
corner of the Main screen above the alarm percentage while in
Night time mode:
- Night time alarm volumes are dependent on default settings
and are typically lower in volume.
TO PAUSE ALL ACTIVE AUDIO ALARM SIGNALS AT THE ICS ONLY
FOR 2 MINUTES*
- In the menu bar of the ICS Main screen, select the Audio pause
button.
OR
- Select the F1 key from the keyboard.