Dräger Infinity Central Station - Page 9

© 2014 Draeger Medic al , Inc .
INFINITY CENTRAL STATION & M300 QUICK REFERENCE GUIDE
| 9
THIS GUIDE IS INTENDED FOR REFERENCE ONLY. REFER TO INSTRUCTIONS FOR USE MANUAL.ADDITIONAL INFORMATION
M300 Telemetry
Record
Key
- Press to generate a strip recording and store an
event at the ICS or press to cancel. (if enabled).
Staff Alert
- Press to send staff alert message to the ICS (trig-
gers a Medium-priority alarm at the ICS,
if ena-
bled).
Up/Down
Arrow
- Press to scroll through waveforms.
-
Press to increase or decrease a setting in an
M300 window.
-
Press both keys longer than 3 seconds to turn
the M300 power on/off.
View Key
- Press and hold longer than 3 seconds to turn the
M300 screen on & off.
-
Press to scroll through the Main, Lead
-
Status, Volume & Demographics screens.
-
Press to cancel Standby Mode.
- Press to accept/confirm user-selected values.
Alarm
Pause
- Press and hold longer than 3 seconds, follow
prompts. (if enabled), press again to cancel
during
all alarms paused status.
- Suppresses alarm monitoring of the corresponding
patient at the ICS and the M300 to pre-
configured
alarm pause period time.