©
2015 Draeger
Medic
al
,
Inc
.
INFINITY M540 QUICK REFERENCE GUIDE |7
THIS GUIDE IS INTENDED
FOR REFERENCE
ONLY. REFER
TO
INSTRUCTIONS FOR USE
MANUAL.ADDITIONAL INFORMATION
Terminology
INFINITY ACUTE CARE SYSTEM (IACS)
- Monitors located at the bedside of the patient or accompany-
ing the patient on transport. They provide continuous moni-
toring and data collection of multiple parameters.
- Includes M540, Cockpit (C700/500), and M500.
M540
- Transport component and patient connection point of the
IACS.
M500
- Docking Station that secures the M540 and charges the inter-
nal battery.
- Provides communication between the M540 and the
C700/500.
- If the M540 is part of an IACS configuration, the M500 controls
the communication between the M540, the Cockpit, and the
Infinity Central Station.
INFINITY CENTRAL STATION (ICS)
- Provides simultaneous central monitoring and critical care
management of up to 32 patients per ICS. It is the secondary
patient monitoring display and alarm source for Infinity patient
monitors displayed on the main screen.
- Provides a bed view port for each M540 device, a waveform
area, a parameter box and a header bar.
To Next Page
