Dräger Infinity M540 - Rest ECG Setup

Instructions for use – Infinity Acute Care System – Monitoring Applications VG6.n 469
System configuration
Rest ECG setup
Appropriate settings are crucial for optimal 12-lead
analysis. The following table lists the available
settings of the Rest ECG report page which
controls various settings. To access this page, see
page 467.
To obtain an optimal automatic diagnostic
interpretation of an Rest ECG report, make sure the
selections in the following table and the Weight,
Height, and Birth date in the Demographics page
(see page 101) are configured appropriately for the
patient.
NOTE
The Rest ECG report is only available for adult
and pediatric patients. NOTE
If the ECG Filter is set to ESU, Rest ECG report
cannot be generated.
Selection Available settings Description
Gender – Unknown (default)
–Male
–Female
The selected information is included in the
report.
Race – Unknown (default)
– Caucasian
– Asian
– African
–Other
Medication 1 No meds, Unknown (default),
list of medications
Medication 2
Condition 1 Pick list with several choices
for indicating the medical
condition of the patient.
(Unknown is the default)
Condition 2
Notes List of entries for annotating
the condition of the patient.
(None is the default)
Rest ECG report Print button The button is grayed out and not selectable
when:
– The patient is not admitted at the ICS.
– The Rest ECG analysis feature is not
activated at the ICS.
– The 12-lead ECG option is not unlocked.
– The required 12-lead cable is not
connected.