Dräger Infinity M540 - Available Reports; Printing Reports

Reports/recordings
498 Instructions for use – Infinity Acute Care System – Monitoring Applications VG6.n
Available reports
If an IACS patient is admitted at the ICS for central
monitoring or was previously admitted there and
the data have been archived, you can request the
following reports from the Cockpit. The reports are
printed on any compatible laser printer
The reports are printed based on pre-configured
settings (see page 470). The header of all reports
contains the following information:
– Patient name and ID number
– Hospital name
– Care unit
– Bed name
– Parameter labels and values (for ECG, ST,
Alarm Event, timed waveform, and continuous
strip reports only)
The footer of all reports contains the following
information:
–Date
– Page number
– Report title
Printing reports
The following table outlines the types of reports that
are available. Most reports can be requested from
several places on the Cockpit.
Type of report Description How to request the report
Print screen Prints the current display.
Whenever you request a
print screen, it is printed on
the connected laser printer.
 C700: Select the Print screen button on the main
menu bar.
 C500: Select the symbol next to the Views...
button on the main menu bar.
If a keyboard is connected to the Cockpit, you can also
use the print screen key of the keyboard to generate a
print screen.
ECG report Prints the waveforms of the
connected ECG leads.
This report is not of
diagnostic quality.
 Select the symbol next to the Trends/ Data... button
on the main menu bar > Rest ECG report
 Select the Trends/ Data... button on the main menu
bar > Trends > Reports > General reports > ECG
report