Dräger Infinity M540 - Saving a New Profile

System configuration
486 Instructions for use – Infinity Acute Care System – Monitoring Applications VG6.n
7 Select the arrow button (F) next to the Profile
menu selection. A summary of the selected
profile appears in the description field (G).
8 Select the Save Profile button (I) to apply the
changes to the selected profile.
Saving a new profile
You can also save a profile under a new name and
assign it to an existing view using the Save Profile
pop-up window.
A Profile name field and setup button
B Description field and setup button
C Default view field and selection button
D Save Profile button
To save a new profile
1 Repeat steps 1 to 6 for saving changes to an
existing profile (see page 485).
2 Select the Save profile as... button (H) in the
Save Profile page (see diagram on page 485).
The Save Profile pop-up window appears.
3 Select the setup buttons next to Profile
name (A), Description (B), and Default view
(C) to enter the corresponding information.
4 Select the Save Profile button (D).
061
A
B
C
D