5
3. Product Features
• Suitable for DIN rail mounting or wall mounting
• Supply voltage 24V DC / 230V AC
• Up to six 4-20 mA transmitter or Pellistor sensing heads
• 1 fault signal via relay
• 1 horn contact via relay
• Up to 4 alarm signals via relays
• Up to four freely adjustable alarm thresholds
• Latching, hysteresis or pulse outputs
• Display of current gas reading
• Test function for output relays
• Line-break and short-circuit monitoring of sensor wiring
• 1 reset button for horn and alarms
• LEDs for alarm, horn and fault
To Next Page
Loading...
