Dräger RVP 5000 - 9 Event History; 10 Event Window

Event History
Dräger RVP 5000 33
9 Event History
All alarms and faults are saved in the event history and the
event viewer.
The event viewer shows all the events that have occurred. Any
actions that have taken place are also displayed on the panel
(e.g. acknowledging an alarm / fault). Use the "Up" and "Down"
buttons to scroll through the saved data.
It is possible to delete the event log at any time, but you must
login first.
The Escape key: Touch the "Back" key for switching the
display to the previous image.
10 Event window
All alarms and faults are shown in the event window.
This function documents all the incoming alarms and faults
with a date, time and description (both active as well as
inactive alarms / faults).
The event window shows the progress of the currently pending
alarms. Use the "Up" and "Down" buttons to scroll through the
data.
HINWEIS
Please note that the Dräger RVP 5000 shows the visi-
ble status messages of the REGARD system and not
the status of the output relays.
Colours Symbol Description
White background,
red text
*** Triggered messages
White background,
brown text
Acc
Pending status reports in the
event window that have not
been acknowledged
White background,
green text
Clr Reset messages
i
i