Dräger X-plore Series User Manual

11
Replacing the visor of the protective visor
z Carefully detach the visor at the two press buttons left and right.
z If you do not want to replace the face cuff, carefully detach the Velcro strap from the cuff.
z Attach the new visor and, if applicable, re-establish the Velcro connection without folds.
Maintenance intervals
Storage and Disposal
Store the Dräger X-plore helmets, hoods and visors in rooms with normal relative humidity
(<90 % rel. humidity), temperature (0
o
C to 40
o
C) containing air with no aggressive
substances.
Dispose of the Dräger X-plore helmet, hoods and visors in accordance with the local regula-
tions for disposal of waste. Your local authorities can provide details of these.
Technical Data
Order List
Type of work to be carried out
Before
each use
After
each use
Every
3 years
Visually inspect protective foil and sweat-
bands and replace if required
X
Thoroughly clean Dräger X-plore helmets,
hoods and visors
X
Replace face cuff X
Designation
Weight
Dräger X-plore protective hood short TH2 (grey/orange) 95 g
Dräger X-plore protective hood long TH2 (grey/orange) 105 g
Dräger X-plore protective hood long TH3 (white) 105 g
Dräger X-plore protective visor TH2 polycarbonate/acetate 505 g
Dräger X-plore safety helmet with visor TH2 (grey) 510 g
Part name and description
Order No.
Dräger X-plore protective hood short TH2 (grey) R 56 736
Dräger X-plore protective hood short TH2 (orange) R 56 737
Dräger X-plore protective hood long TH2 (grey) R 56 738
Dräger X-plore protective hood long TH2 (orange) R 56 739
Dräger X-plore protective hood long TH3 (white) R 56 740
Dräger X-plore protective visor TH2, polycarbonate R 56 746
Dräger X-plore protective visor TH2, acetate R 56 728
Dräger X-plore safety helmet with visor TH2 R 56 747
Dräger X-plore corrugated hose TH3 R 55 571
Dräger X-plore corrugated hose TH2 R 56 704
TYVEK
®
head protection hood
® TYVEK is a registered trademark of DuPont
TM
R 55 354
Tearable protective foils for hoods and safety helmet with visor R 55 358
Tearable protective foils for protective visors R 55 095
Sweatband for all protective visors R 55 119
Sweatband for safety helmet with visor R 55 971
Replacement visor for R 56 746 protective visor, polycarbonate R 55 433
Replacement visor for R 56 728 protective visor, acetate R 55 437
Face cuff, grey, for protective visors R 56 734
Replacement visor with grey face cuff for R 56 747 helmet R 56 756
Earmuffs (two pieces) R 55 585

Dräger X-plore Series Specifications

General

Brand	Dräger
Model	X-plore Series
Category	Respiratory Product
Language	English