www.dragino.com
LPS8 LoRaWAN Gateway User Manual 13 / 55
3 Typical Network Setup
3.1 Overview
The LPS8N supports flexible network set up for different environments. This section describes the
typical network topology can be set in LPS8N. The network set up includes:
✓ WAN Port Internet Mode
✓ WiFi Client Mode
✓ WiFi AP Mode
3.2 Use WAN port to access Internet
By default, the LPS8N is set to use the WAN port to connect to an upstream network. When you
connect the LPS8N’s WAN port to an upstream router, LPS8N will get an IP address from the
router and have Internet access via the upstream router. The network status can be checked as
below:
To Next Page
Loading...
